In a lot of enterprises and fields, managing heat is important for keeping things running smoothly, safeguarding equipment, and keeping costs down. Two typical ways to achieve this are via fluid towers, which are also called fluid coolers, and cooling towers. The names are similar, but the manner they cool things down and the situations in which they are used might be completely different. The names are similar, but the manner they cool things down and where they are employed might be very different.
What Is a Cooling Tower?
A cooling tower cools water by letting it evaporate. Warm water from a process or HVAC system is poured over the fill material inside the tower, where it mixes with the air that is traveling through it. A little amount of water evaporates, taking heat with it. This cools the water that is left before it flows back through the system.
Cooling towers are used in big buildings, factories, and power plants. They are wonderful for chilling down a lot of water rapidly and well. Cooling towers often get very near to the wet bulb temperature in the air since evaporation is what makes them work. This helps them chill things down a lot.
But open cooling towers allow the air touch the water that is moving through them. This can let dust, filth, and living things into the water, so it has to be cleaned and treated often.
What Is a Fluid Tower?
A fluid tower, also known as a fluid cooler, uses a closed loop system to cool down a process fluid without allowing it touch the air. The device doesn’t spray the process fluid; instead, it transfers it through coils. Water is sprayed over the coils to cool the fluid within as air moves through the device.
Fluid towers are often used when it’s important to keep contamination to a minimal since the process fluid stays inside the coils. Because of this, they are widely employed in factories and other places where the quality of the water or the stability of the chemicals is particularly essential.
Fluid towers also reduce the amount of treatment that needs to be done on the process fluid itself. But you still need to take care of the water that sprays outdoors.
Fluid Towers and Cooling Towers: The Main Differences
The fundamental difference between these systems is whether or not the air is in contact with the process fluid. Fluid towers are closed-loop devices that protect the fluid inside the coils. Cooling towers are systems that are open.
Cooling towers are often better at getting rid of heat for huge businesses, and they use less energy when water quality isn’t as critical. Fluid towers, on the other hand, do a better job of protecting fragile fluids and equipment. This can help you save money on maintenance in the long run and make your equipment last longer.
The two are also different in how they are set up and used. The coil system in fluid towers could make them more expensive to acquire at initially, but they can make things easier to run when fluid purity is critical.
Choosing the Right System
When deciding between a cooling tower and a fluid tower, there are a lot of factors to think about. These are the sort of fluid that has to be cooled, the risk of contamination, the temperatures at which the tower will be utilized, and how easy it is to undertake maintenance. Cooling towers are often ideal for buildings that wish to be efficient and get rid of a lot of heat at once. Fluid towers, on the other hand, could be beneficial for companies that need to protect fluids or work in a closed loop.
Reliable Parts Keep Systems Running
Your system requires reliable parts and regular maintenance to perform properly and survive a long time, no matter what it is. Universal Tower Parts can help you keep your cooling equipment functioning at its best by giving you new parts, improvements, or professional guidance. Contact us right away so we can help you find the right parts and repairs for your system.
Universal Tower Parts In Phoenix, AZ
Universal Tower Parts provides stainless steel and galvanized options, welded and gasketed, direct, gear reducer and belt drive units, with efficient Jedair fans, and Jedair low noise fans. Strainers, fan guards and louvers are well constructed, and designed to operate efficiently as they perform their function. Cool Core drift eliminators and fill are made by Universal Tower Parts expressly for our towers.
